Tel :+86 750 8936336
Fax :+86 750 8936336
Mobile :+86 13380951262
WeChat :+86 13380951262
Whatsapp :+86 13380951262
Email : email@example.com
Add : No.388,Huiyuan industrial park,Heshan city,Guangdong province,China
This article will show you how to change the colour of a leather sofa. We will be changing of a small seat from a light beige colour to maroon to demonstrate the correct procedure of changing the colour of leather.
A colour change can be made from any colour to another, i.e. black to white, or white to black, with just as successful results.
The leather colourant kit used in this guide can be used to change the colour of all leather, vinyl, plastic, PVC & leather cloth car interiors.
This photo shows a seat cushion we will be changing from beige to maroon.
Leather Colourant Kit - Used to change the colour of leather
Step 1.Removing Waxes
The first step is preparing the leather ready for applications of colour. We do this to remove any waxes, oils or silicones that may be present on the leather, not removing these could cause adhesion problems. Prepping the leather also removes the manufactured finish. If the leather is very dirty, clean it first with the leather warm soapy water.
Do the back & sides first. A lot of furniture these days have finished splits on the back & sides and using a strong cleaner like the leather prep would strip the colour off so we won't be using it on the sides. For the sides all you need to do is wipe them down with some alcohol cleaner on a cloth. Not prepping the back and sides as thoroughly as the rest of the leather won't affect the end results, this is because the back and sides aren't really used and so come under no, or very little stress
Because the seating cushions and other areas come under more stress (wear & tear) it is more important to prepare them. To do this it is best to rub them with the leather prep and an abrasive pad, this application removes the leather finish. A good way to apply this is to place two cotton wool balls on the abrasive pad and then wet them in prep, fold the abrasive pad over the balls and then use it to rub the leather.
This way applies the prep in the correct and sparing way making the product last longer.
Prepping the leather in this manner will remove any creased and cracked areas on the leather. So it not only makes the leather ready for colouring but it greatly improves its appearance. Any severe cracks can be filled using heavy filler.
The leather is correctly prepped when you start to see colour transfer from the leather onto the abrasive pad or cloth. This indicates that the finish has been removed exposing the colour beneath. Any distinctive creases in the leather may wear through quicker than other areas once colour is applied (this would only happen on a colour change job, and is just a maybe). To reduce the chance of this happening wet some fine grade sandpaper (320+) in leather prep and rub along the crease to reduce it. Then proceed to the next step.
The previous step will have removed the manufacturers finish and any silicones that are soluble in solvents. There are however some silicones like spray on polish and waxes that aren't soluble in solvents, and so to remove these we need to use the alcohol cleaner. After using the leather prep wipe the leather down with a cloth dampened in the alcohol cleaner and for ease of use you could also spray the alcohol cleaner directly onto the leather. Now wait 30 minutes for the cleaners to evaporate.